Best Table Saw Miter Gauges

Your table saw won’t take you very far if you don’ have the right accessories. Buying fences and miter gauges is a deceptively complicated task. While most people think it’s a pretty straightforward consideration, the wrong piece of gear can truly jeopardize your work and even make the saw unsafe to use.

I don’t want that for you. In order to get the best table saw miter gauge you can get your hands on I have personally tested a wide range of miter gauges. The products that made their way onto my list did so on the basis of their durability.

Factors to Take Into Account When Buying Table Saw Miter Gauge

If you are still torn between the options on our list today I understand. Decisions are always hard and they certainly don’t get any easier when you have to choose between ten really awesome products.

Table Saw Miter Gauges

While all of the options on our list are really great at what they do only one of them will be truly perfect for your needs.

The considerations below should hopefully make it easy for you to determine exactly which product that is. So, without further ado read on for some miter gauge buying considerations.

First, Why a Miter Guage?

The miter gauge makes it easy to select for the cutting angle. A good miter gauge is going to allow you to choose between angles ranging from -45 degrees all the way up to 45 degrees.

Many table saws actually come with miter gauges which is great but often enough woodworkers find it necessary to go out and find one that suits their unique range of needs.


Many miter gauges will also come with a fence. Since you are going to need both accessories to properly use your saw, this combination is a great opportunity to get both of them at a bargained rate. Our top choice is a good example of a product that combines a fence and a miter gauge for maximum performance.

Now, that said, if you already have a fence that you are attached to it will probably be to your benefit to forgo the combo set.

A decent fence is going to last a pretty long time so it isn’t really financially prudent to double down unless you really want to.


Chances are pretty good that the miter gauge you have your eyes on will work well with whatever saw you have on hand. However, this is not necessarily always the case. If you want to make sure that the accessory you are considering will be compatible with your tools, it won’t hurt to check the label.

Most of the time, compatibility is not an issue. However, in certain cases, it can be.


Even though miter gauges are not necessarily coming into contact with the hazardous elements of your work environment they do still encounter plenty of wear and tear.

Keep in mind that they are being used in conjunction with a tool that produces thousands of rotations a minute. Add to the fact that they are often transported from job site to job site—rough environments in their own right—and it becomes pretty clear that durability is a consideration worth factoring into your buying decision.

Cheaply made miter gauges don’t usually last very long but you can maximize the proverbial bang for your buck by investing in a product that has been built to last.


Being that the miter gauge is just a single accessory you probably aren’t going to want to sink a tremendous amount of your tool budget it not acquiring one. The truth is that most decent miter gauges are going to be fairly effective at what they do. In other words, the difference between the really expensive units and the moderately priced ones is not going to be enormous.

That said, the price range can be pretty big. On this list alone we had units that hover around $200 and others that were available for $20 or less.

Which is right for you? Most people are probably going to favor something that hovers between the two price ranges. Spending a moderate amount of money should treat you to a reliable long term experience.

How Well are the Numbers Cut?

This is kind of a silly consideration insofar as the fact that it will feel kind of tedious and even petty. It’s also super important though. The way that the numbers are cut will have a massive impact on how long you can use your miter gauge.

How much of pity would it be to find a durable, reliable miter gauges that you really like, only to have to throw it away after six months because you can no longer read the numbers?

If this sounds unlikely to you, don’t be fooled. Indeed, poorly rendered numbers might be one of the number one miter gauge killers out there.

The more you use the miter gauges, the more the number grooves will deteriorate. However, there are production methods that sharply curve the amount of wear and tear that the tool is likely to experience.

For example, if you can get your hands on a miter gauge that has been laser cut the numbers should be deep and durable enough to last for a long time.


As mentioned throughout this guide, the miter gauge is truly on the front lines of the table saw use. That being the case it can be handy to have a decent warranty that will protect you in the event that an unexpected issue occurs.

In general, you can expect to find decent warranties that keep you covered for a year, though better units will provide even more protection.

Best Table Saw Miter Gauges 

1. Big Horn 14600 3/4″ x 3/8″ Standard Track Miter Gauge


We end the list with the Big Horn. This unit features a reasonable price tag and an easy to use interface that will be suitable for the beginner. The many stop points complement the simple controls to ensure that just about anyone will be able to effectively use this piece of equipment.

Users will also be pleased with the relatively simple installation process that makes getting started with the Big Horn quick and very easy.

These things said though, there are some problems to bear in mind. For one thing, durability is a concern. This is a particularly prevalent issue with the bar. As you regularly use the tool the bar is likely to distort somewhat which can be a problem for the frequent user.

And, as with many of the more affordable miter gauges on our list, there is also an issue with the numbers. They tend to degrade over time which means you may find yourself unable to read them.

Additional Specification

  • Best For: Accuracy & Safety
  • Miter Bar: 3/4 x 3/8-Inch
  • Weight: 2.74 pounds
  • Manufacturer: Big Horn
  • Dimensions: 6.7 x 3.55 x 19.7 inches

What We Like:

  • It’s another piece of equipment that is straightforward and easy for the beginner to use.

What We Didn’t Like:

  • It’s not going to hold up very well to prolonged periods of use.

2. Woodstock D3123 Heavy-duty Miter Gauge

Woodstock D3123 Heavy-duty Miter Gauge

The Woodstock is a good, moderate pried piece of equipment that is available at a wide range of different stop points. Indeed, the tool will be extremely versatile for the buyer that has a wide range of different uses in mind.

The numbers have been laser cut making them as legible as possible and there are chrome accents that should make the unit durable against corrosive elements such as moisture.

Unfortunately, there are some durability concerns that you may need to bear in mind. It’s not quite as tough as some of the other products on this list which may be a problem in the long run.

Additional Specification

  • Best For: Largest & Strongest
  • Miter Bar: 3/8 x 3/4-Inch
  • Weight: 9.92 pounds
  • Manufacturer: WOODSTOCK
  • Dimensions: 18.5 x 9 x 3 inches

What We Like:

  • It’s a good, reliable piece of equipment that will do well to suit the needs of the average woodworker.

What We Didn’t Like:

  • Unfortunately, there are some durability concerns that cut against the effectiveness of this tool.

3. Kreg KMS7102 Table Saw Precision Miter Gauge System

Kreg KMS7102 Table Saw

The Kreg is a high-end fence and gauge combination that is available at an affordable price. It is an extremely precise piece of equipment that features laser-cut numbers.

Consequently, you should have an easy time reading the numbers even after a prolonged period of use.

You also get a pretty solid fence that further improves the value of the offer. All of this said though there are some durability concerns that diminish the value of the tool.

Though the average user shouldn’t run into many problems those that use their saw often might. The fence, in particular, may bend or distort under pressure.

Additional Specification

  • Best For: Affordable Price
  • Miter Bar: 3/8 x 3/4-Inch
  • Weight: 6 pounds
  • Manufacturer: Kreg
  • Dimensions: 25.25 x 2.63 x 6.25 inches

What We Like:

  • At a glance, this is essentially a clone of the last product that we looked at, all for a much better price.

What We Didn’t Like:

  • Appearances can be somewhat deciding. Though this unit has all the appearances of our top choice it isn’t quite as durable. Heavy-duty users may run into some problems.

4. POWERTEC 71005 Deluxe Table Saw Miter Gauge

POWERTEC 71005 Deluxe Table Saw Miter Gauge

I really like this next product because it is perfect for the buyer on a budget. If you have a limited amount of money to spend and still need something reliable there is no question that this will be the product you choose.

The reliable build features a durable, comfortable handle that will stand up well to prolonged periods of use. The miter gauge also features stops ant all common angles of operation. This means it should be more than versatile enough to suit the needs of the average user

The only real issue is that the numbers are not very well made. They were poorly cut which means that over time you won’t be able to read the miter gauge any more—effectively rendering it useless.

Additional Specification

  • Best For: Comfort & Strength
  • Miter Bar: 3/4 x 3/8-Inch
  • Weight: 3.3 Pounds
  • Manufacturer: POWERTEC
  • Dimensions: 20 x 8 x 3 inches

What We Like:

  • The PowerTec is an extremely affordable piece of equipment that will be great for the buyer on the budget.

What We Didn’t Like:

  • While this is a durable piece of equipment the numbers may distort and become difficult to read over time.

5. SKIL 3410 Table Saw Replacement Miter Gauge

SKIL 3410 Table Saw Replacement Miter Gauge

If you are an owner of a Skil saw, this next product will be an enticing opportunity for you. This is one of the most affordable miter gauges on our list today. And in this case, your relatively modest amount of money buys you quite a bit of utility.

It includes a wide range of stop points to maximize the durability of your tool. It also includes easy installation and well-rendered numbers.

Why would anyone even consider a different product? Well, here’s a reason: the compatibility is incredibly limited. This gauge works exclusively with other Skil saw products meaning unless you have one, you’ll need to invest in something else entirely.

Additional Specification

  • Best For: Skil saw
  • Miter Bar: 5/8 x 7/16-Inch
  • Weight: 6.1 ounces
  • Manufacturer: Chervon
  • Dimensions: 12 x 12 x 3.13 inches

What We Like:

  • This is a durable piece of equipment that will serve as an outstanding replacement product for any Skil Saw.

What We Didn’t Like:

  • I actually love this product. I only wish it was more versatile. This unit is only compatible with other Skil saw products, making it very limited.

6. INCRA MiterV120 Miter Gauge for Table Saw

INCRA MiterV120

The Incra is a moderately priced piece of equipment with tons of utility. The unit features loads of different stop points helping you truly maximize the versatility of your saw. It also features an easy installation process and well-rendered numbers that shouldn’t deteriorate much over time.

These things in mind it will be a good fit for the woodworker that is serious about their craft and looking for a piece of gear that is similarly serious.

That said, the quality of the materials is a little bit lacking. The metal may distort over time.

Additional Specification

  • Best For: Every Woodworker
  • Miter Bar: 3/4 x 3/8-Inch
  • Weight: 2.55 pounds
  • Manufacturer: Incra
  • Dimensions: 17.3 x 4.2 x 2.2 inches

What We Like:

  • It’s a moderately priced piece of equipment with a ton of utility.

What We Didn’t Like:

  • It’s not as durable as I prefer to see. It may bend and distort over time which leads to some long term durability concerns.

7. Incra MITER1000SE Miter Gauge Special Edition

Incra MITER1000SE Miter Gauge Special Edition

The Incra is a fence miter gauge combination tool that will be well suited for the buyer that needs both accessories It is an extremely durable product that will stand up well to prolonged periods of use.

The unit features lasered numbers that will stand up well to wear and tear and a variety of different stop points to improve the versatility of the tool.

Unfortunately, the price is pretty respective. The unit is disproportionately expensive relative to its performance.

Additional Specification

  • Best For: Precise, Versatile
  • Miter Bar: 3/4 x 3/8-Inch
  • Weight: 8.26 Pounds
  • Manufacturer: Incra
  • Dimensions: 18.25 x 18.25 x 4.5 inches

What We Like:

  • It is a very durable piece of equipment for the buyer that has a variety of needs.

What We Didn’t Like:

  • The price tag is way out of line here. This is a lot more than most people will want to pay for a miter gauge.

8. Precision Miter Gauge with a Standard Slot

Precision Miter Gauge

The Precision Miter Gauge features an affordable price tag and a wide range of stop points that make it good for performing a wide range of different duties. This includes things like the elusive crosscut.

In addition to being durable, this gauge is also easy to adjust and install making it a good fit for the average user that intends to regularly use their gauge.

Unfortunately, though, the features are not quite robust enough for the heavy-duty woodworker. For one thing, the metal may distort over time, especially during heavy use.

The numbers are also going to deteriorate pretty quickly, which makes it basically useless.

Additional Specification

  • Best For: High quality
  • Miter Bar: 3/4 x 3/8-Inch
  • Weight: 2.55 pounds
  • Manufacturer: Fulton
  • Dimensions: 36.1 x 5.2 x 5.2 inches

What We Like:

  • It’s a good straightforward tool for the buyer on the budget.

What We Didn’t Like:

  • This unit is not durable enough to suit the needs of someone that regularly uses their table saw.

9. Grizzly H5774 Miter-Gauge For Table Saw

Grizzly H5774

The Grizzly is an affordable piece of equipment that will be optimal for the occasional user. It features a wide range of different stop points, a stable miter bar, and chrome hardware that makes it resistant to the wear and tear of the elements.

It is also relatively durable, especially as it pertains to the needs of the occasional user. However, the heavy-duty user is probably going to have some issues. For one thing, the bar may distort somewhat after regular use. The numbers are also likely to degrade after an extended period of time.

Additional Specification

  • Best For: Adjustable
  • Miter Bar: 3/8 x 3/4 x 13-Inch
  • Weight: 5.95 pounds
  • Manufacturer: Grizzly
  • Dimensions: 7.6 x 18.5 x 3.5 inches

What We Like:

  • This is an affordable piece of equipment that is going to be resistant to corrosion.
  • It is a durable miter gauge that will be fine for the occasional user.

What We Didn’t Like:

  • The numbers will deteriorate over time. And, if you use the gauge a lot you may find that the bar distorts which will be problematic for the regular user.

10. INCRA Miter1000/HD Miter Gauge

INCRA Miter1000

If you are looking for an extremely accurate and versatile miter gauge/ fence combination this is going to be the unit for you. The telescopic fence can be adjusted to work with the stock of varying sizes.

The miter gauge is also pretty phenomenal. Made of cast metals it is one of the most durable and consistently stable pieces of equipment on our list today. It also features laser-cut numbers that should stay legible indefinitely.

Finally, the range of use is radically broad. You can cut at angles of up to 180-degrees making it the perfect product for buyers that need a pro-grade piece of equipment.

Unfortunately, all of these awesome features come at a pretty steep price. While most miter gauges are actually pretty affordable this is the exception that proves the rule. Not only is this the most expensive miter gauge on the list today it is one of the pricier products on the market at large.

Additional Specification

  • Best For: Most Refined Model
  • Miter Bar: 3/4 x 3/8-Inch
  • Weight: 7.63 pounds
  • Manufacturer: Incra
  • Dimensions: 21 x 7.8 x 3.6 inches

What We Like:

  • This durable miter gauge is as versatile as you can expect to get.
  • If you need something that will last basically forever then this will be a great unit to consider.

What We Didn’t Like:

  • It’s way more expensive than your average miter gauge.

Table Saw Miter Gauges Comparison Chart

NameBest ForMiter BarWeightManufacturerDimensions(in.)
Big Horn 14600 Miter GaugeAccuracy & Safety3/4 x 3/8-Inch2.74 poundsBig Horn6.7 x 3.55 x 19.7
Woodstock D3123 Miter GaugeLargest & Strongest3/8 x 3/4-Inch9.92 poundsWOODSTOCK18.5 x 9 x 3
Kreg KMS7102 Table Saw Miter GaugeAffordable Price3/8 x 3/4-Inch6 poundsKreg25.25 x 2.63 x 6.25
POWERTEC 71005 Saw Miter GaugeComfort & Strength3/4 x 3/8-Inch3.3 PoundsPOWERTEC20 x 8 x 3
SKIL 3410 Table Saw Miter GaugeSkil saw5/8 x 7/16-Inch6.1 ouncesChervon12 x 12 x 3.13
INCRA MiterV120 Miter GaugeEvery Woodworker3/4 x 3/8-Inch2.55 poundsIncra17.3 x 4.2 x 2.2
Incra MITER1000SE Miter GaugePrecise, Versatile3/4 x 3/8-Inch8.26 PoundsIncra18.25 x 18.25 x 4.5
Precision Miter GaugeHigh quality3/4 x 3/8-Inch2.55 poundsFulton36.1 x 5.2 x 5.2
Grizzly H5774 Miter-GaugeAdjustable3/8 x 3/4-Inch5.95 poundsGrizzly7.6 x 18.5 x 3.5
INCRA Miter1000/HD Miter GaugeMost Refined Model3/4 x 3/8-Inch7.63 poundsIncra21 x 7.8 x 3.6

Frequently Asked Questions And Answered

What is the best miter gauge?
That will definitely depend on your needs. However, there are products that I prefer. For example, the INCRA is a very solid piece of equipment that will be good for buyers that demand the best of the best.

However, everyone will ultimately have different needs.
What is a miter gauge used for on a table saw? The miter Gauge helps you to set accurate cutting angles that will guarantee the quality of your work.

What is the best table saw?
There is no quick answer to that question. I could devote thousands of words to which the table saw is the best. That said, there are many reliable companies that are worth looking into. For example, Bosch and DeWalt both make pretty incredible saws.


Did one of our miter gauge help you to make a decision? When it comes to selecting between ten very good, and in some cases very similar products most people struggle with their decisions somewhat.

If you are in that boat, I get it. However, there are a couple of recommendations that might help you narrow down your choices.

Do you want the best table saw miter gauge you can get your hands on no matter what it costs? If so you will be well served by our top choice, the INCRA Miter1000/HD Miter Gauges.

Finally, if you want something that is budget-friendly you may look towards the POWERTEC 71005 Deluxe Table Saw Miter Gauge.

Bottom line though? If you choose from this guide, you’re sure to find something that you like.

Similar Posts